Data Center
Full data center service from design to operation – from one source – from H1 Systems.
The custom-built data center is the conventional way of constructing a data center where modularity and flexibility are not among the expressed priority demands but a rather physical security and adaptation to build environment are much more emphasized.
The professional challenges in the construction of a built data center are in the specific features of design, implementation and operation. With the support of its experienced professionals H1 Systems provides customized solution in each and every case.
The biggest difference compared to the conventional data center is in modularity. The pre-fabricated data center solutions provide our client the following option among other:
Pre-fabrication can mean several solutions from masonry modules (modular) to turnkey containers.
Before pre-fabrication we do an intensive and precise assessment and planning process where all questions get clarified due to the experience of decades of our personnel. Thanks to the standardized and quality assured conditions of component manufacturing, assembly, set-up and testing, you can significantly reduce the number of unexpected challenges during on-site installation which usually involve additional time-wasting and costs.
About the unique solutions of our manufacturers you can read more in the followings.
Huawei modular data centet, all-in-one container
The chosen cooling solution significantly influence the operation costs of the data center, consequentially, development activities focus on improving energy efficiency and reducing operation costs. This way of thinking is reflected in our designing objectives, implementation commitment and operation precision. In Hungary you can meet the indoor thermal requirements by using free cooling in the 90-95% of uptime. By choosing a good cooling solution, 10-45% of cooling energy can be saved (compared to a conventional solution) in accordance with customer demand, local endowments and environmental conditions.
We offer a broad range of manufacturing solutions in cooling, as well:
As an initial step of meeting energy efficiency and environmental or increased demand, the condition of existing technical devices and processes must be evaluated. H1 Systems offers professional support to realize these in a close cooperation with the professionals of the customer. In case of a modernization, identification of errors, energy optimization or efficiency improvement, it is a usual advantage if an engineer auditor or developer (external) colleague is also involved in the process.
Our highlighted products are the followings:
According to the ASHRAE 2011 guidelines for data centers, the evaporation technology will be one of the most efficient ways of cooling in case of data centers. We are able to cool the air to 25-26oC for ICT devices with minimal evaporation (by using 2-4m3/h 1 MW cooling). For this there are two ways:
Compressor cooling and free cooling
Compressor-based cooling is the simpliest way of data center cooling service. By using smart regulation, we improve energy efficience in the case of new or already existing systems.
Possible solutions:
Rack layout and cooling
Dynamic set point and super saver (smart temperature and humidity regulation)
In case of the heta resource/waste heat is available, absorption cooling is an efficient way of supplying cooling water of the data center. The combination of gas engine (fuel cell) with absorption cooling can be a benefitial solution, as long as gas prices are low.
Server set in liquid
Server set in insulating refrigerant (transformator oil)
Server set in special liquid
About energy efficient cooling technologies you can read more from our expert, Gyula Oláh on the following link.
H1 Systems provides full building-up of systems, HVAC design and implementation. Air handling is the key of HVAC systems. Good ways for it are smart air ventilation or proper humidification.
At a full power supply system, it is indispensable to harmonize the distribution network, the uninterrupted power supply (UPS) devices and auxiliary operation systems (aggregators) as a single system and provide:
double conversion + battery + diesel generator set
UPS+ dynamic UPS + generator set
Redundant fuel cells:
Emerson UPS solution
Huawei UPS solution
At a full power supply system, it is indispensable to harmonize the distribution network, the uninterrupted power supply (UPS) devices and auxiliary operation systems (aggregators) as a single system and provide:
At our EM and RF protection solutions we consider:
The creation of protection is always a multi-disciplinary complex task which can spread from the lower to higher level of shading of the rooms (EMC and EMP protection, even with a TEMPEST qualification.
In order to provide high level availability for a facility, the fire protection has a highlighted importance. This are not exclusively requirements regarding life protection since most of the times devices got damaged not by fire but the combustion flue gases which go in the device’s parts and cause damages and can result in operation break.
By the implementation of fire detection and extinguishing systems, the following rules are applicable:
Types of automated extinguishing systems:
These integrated systems provide information related to:
management of automated intervention.
Main elements of DCIM systems:
About our solutions with the contribution of our partner you can read more in the followings:
Two types of ICT communication network are WAN (wide area network) and LAN (local area network)